A motorized shark 3D for print
1492 Views 0 Likes 0 Downloads Download
This is an add on parts for "A Shark" (https://cults3d.com/en/3d-model/gadget/a-shark)
Assembly is required.
Assem...ble instruction is in my youtube channel
https://youtu.be/I4kt3q0YJZ0
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*Lubricating moving and rolling parts with silicone grease is recommended.
*Require small 5v DC motor and electric components such as electric wires
Layer height: 0.18mm
Shell count: 3
Fill density: 15%~20%
Technology: FDM
Material: PLA or ABS
Dimensions: about 225mm x 130mm x 10...0mm
Material Quantity: about 110g
3D file format: STL
Last update: 2020/09/18 at 10:56
Publication date: 2020/09/12 at 03:51
Designer
Jwoong3d model description
Printable Shark Mechanical ToyThis is an add on parts for "A Shark" (https://cults3d.com/en/3d-model/gadget/a-shark)
Assembly is required.
Assem...ble instruction is in my youtube channel
https://youtu.be/I4kt3q0YJZ0
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
Use a raw 1.75mm filament and super glue while assemble the parts.
*Lubricating moving and rolling parts with silicone grease is recommended.
*Require small 5v DC motor and electric components such as electric wires
3d model print parameters
Layer height: 0.18mm
Shell count: 3
Fill density: 15%~20%
Technology: FDM
Material: PLA or ABS
Dimensions: about 225mm x 130mm x 10...0mm
Material Quantity: about 110g
3D file format: STL
Last update: 2020/09/18 at 10:56
Publication date: 2020/09/12 at 03:51
