Accordion fold ceiling fan sconce 3D for print
918 Views 0 Likes 0 Downloads Download
This sconce fits onto the light fixtures of most ceiling fans. However, I've included the origi...nal Blender file if it needs to be modified to fit a specific fan.
You may need to experiment with different print settings and Fill Densities to get the best results with your specific light bulbs. If the walls of the sconce are too thin, they may warp due to the heat from the bulbs.
The settings I used for the "Low Heat" version of the model are:
Layer Height - .1
Print Speed - 50
Shell Thickness - .8
Fill Density - 0%
Support Type - None
Platform Adhesion Type - Brim, 20 lines
The settings I used for the "High Heat" version of the model are:
Layer Height - .1
Print Speed - 50
Shell Thickness - 1.2
Fill Density - 100%
Support Type - None
Platform Adhesion Type - Brim, 20 lines
Designer
Brian Franklin3d model description
A sconce for light fixtures attached to ceiling fans.This sconce fits onto the light fixtures of most ceiling fans. However, I've included the origi...nal Blender file if it needs to be modified to fit a specific fan.
You may need to experiment with different print settings and Fill Densities to get the best results with your specific light bulbs. If the walls of the sconce are too thin, they may warp due to the heat from the bulbs.
The settings I used for the "Low Heat" version of the model are:
Layer Height - .1
Print Speed - 50
Shell Thickness - .8
Fill Density - 0%
Support Type - None
Platform Adhesion Type - Brim, 20 lines
The settings I used for the "High Heat" version of the model are:
Layer Height - .1
Print Speed - 50
Shell Thickness - 1.2
Fill Density - 100%
Support Type - None
Platform Adhesion Type - Brim, 20 lines
