Airless ping pong ball 2.0 3D for print
1204 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
https://makerworld.com/en/models/426056
3.0 version also available with a commercial license here:
h...ttps://cults3d.com/en/3d-model/game/airless-ping-pong-ball-3-0
This is the 2.0 version:
Now with more bounce, stronger, thicker, more fun!
Prints without supports for easier post processing. Print with a 5mm brim, 10mm if you have adhesion issues.
For best results, print in PETG, or a tough PLA! ABS also holds up well. Regular PLA tends to crack easily, try a FPLA instead if you have access.
Brim IS necessary. If you are having adhesion issues, clean build plate with alcohol and increase brim to 10mm.
Designer
Avatar E_T_ Dylan Kahle3d model description
NEW 3.0 version now available on MakerWorld!https://makerworld.com/en/models/426056
3.0 version also available with a commercial license here:
h...ttps://cults3d.com/en/3d-model/game/airless-ping-pong-ball-3-0
This is the 2.0 version:
Now with more bounce, stronger, thicker, more fun!
Prints without supports for easier post processing. Print with a 5mm brim, 10mm if you have adhesion issues.
For best results, print in PETG, or a tough PLA! ABS also holds up well. Regular PLA tends to crack easily, try a FPLA instead if you have access.
Brim IS necessary. If you are having adhesion issues, clean build plate with alcohol and increase brim to 10mm.
