Dinosaurs kit cards 3D for print
130 Views 0 Likes 0 Downloads Download
Kit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combine...s the concept of a postcard with the joy of 3D printing. You can gift it to someone in an envelope and build your own Jurrasic park.
This is a digital 3D printable model of 5 Dinosaurs kit cards.
The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.
Models of 5 kit card dinosaurs.
It is printed flat and then assembled
Data ready for 3D printing in STL format
3D Models are fully ready for Simple 3D printing on SLA, SLS, and FDM printers
Data ready for 3D printing:
5 STL kit cards
SIZE
At 100% scale the model’s dimensions are approximately:
Width 85 mm
Length 85 mm
Height 2,4 mm
Only Stegosaurus and Triceratops differ in sizes:
Stegosaurus width: 116 mm
Triceratops width: 156 mm
Triceratops length: 87 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15 %
Printing settings will vary greatly depending on your specific printer.
NOTE:
To highlight the dinosaur scales, use the color-change feature of your slicer.
ASSEMBLY:
Use small cutting pliers to free the pieces from the kit card. Have fun building your own Jurrasic park. :)
Stegosaurs plates are in order from back to the front. Don't mix them up :)
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15 %
Printing settings will vary greatly dep...ending on your specific printer.
Designer
3D-mon3d model description
DINOSAURS Kit CardsKit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combine...s the concept of a postcard with the joy of 3D printing. You can gift it to someone in an envelope and build your own Jurrasic park.
This is a digital 3D printable model of 5 Dinosaurs kit cards.
The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All cut parts are placed on the print bed as we would print them to save you time.
Models of 5 kit card dinosaurs.
It is printed flat and then assembled
Data ready for 3D printing in STL format
3D Models are fully ready for Simple 3D printing on SLA, SLS, and FDM printers
Data ready for 3D printing:
5 STL kit cards
SIZE
At 100% scale the model’s dimensions are approximately:
Width 85 mm
Length 85 mm
Height 2,4 mm
Only Stegosaurus and Triceratops differ in sizes:
Stegosaurus width: 116 mm
Triceratops width: 156 mm
Triceratops length: 87 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15 %
Printing settings will vary greatly depending on your specific printer.
NOTE:
To highlight the dinosaur scales, use the color-change feature of your slicer.
ASSEMBLY:
Use small cutting pliers to free the pieces from the kit card. Have fun building your own Jurrasic park. :)
Stegosaurs plates are in order from back to the front. Don't mix them up :)
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here.
3d model print parameters
Notes:3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15 %
Printing settings will vary greatly dep...ending on your specific printer.
