Among us drinkcoaster 3d model for 3d printers free

Among us drinkcoaster 3D for print

3072 Views 2 Likes 2 Downloads Download the piece here from 3dforprint

Designer

IDEALAB

3d model description

This download contains two drinkcoasters, a negative and positive one. If you print it for a drinkcoaster, i would print the negative one. Cause that ...one provides more stability for your glass/cup. Use these coasters to place your favourite drink. If you have printed it, don't hesitate to show of your skills and upload a picture.
This is a standard size coaster (100 by 100 by 5 mm), to fit in my coasterholder:
https://www.thingiverse.com/thing:3130397
Made with love by:
Raimon of IdeaLab

3d model print parameters

I have printed this model with Fillamentum baby blue & light ivory (not real ivory) PLA. I used 0.25mm layer height and, 18% infill. I used a 0.4mm no...zzle with my extruder at 210 degrees Celcius. I used a heated bed. To avoid the curling up at the bottom i used a brim. Don't hesitate to use your own configuration....no worries!