Among us 3D for print
2044 Views 2 Likes 1 Downloads Download
with the entire onlin...e maker community,
Without further ado, I bring you this design of detachable figurines from AmongUs.
I hope you enjoy them as much as I have enjoyed making them. Warm regards to everyone.
Extrudate: 195ºC
Bed/ bed: 60ºC
Fans/ Layer fan:100%
| PETG |
Extrudate: 230ºC
Bed/ bed: 80ºC
Fans/ Layer fan:70-80%
Travel speed:... 150mm/s
Initial layer speed: 15mm/s
Printing speed/ Printing speed: 30mm/s
Perimeters/Shells: 3
Layer height: 0.16 or 0.2mm (as desired)
Top and bottom layers / Bottom&Top Layers: 3
Infill: 15%.
Supports: Yes
Designer
MIKE_MAKER3D3d model description
A CultMakers salute. My name is Mike McGyver and I'm new to Cults. I'm very excited to join this community, and I want to startwith the entire onlin...e maker community,
Without further ado, I bring you this design of detachable figurines from AmongUs.
I hope you enjoy them as much as I have enjoyed making them. Warm regards to everyone.
3d model print parameters
| PLA |Extrudate: 195ºC
Bed/ bed: 60ºC
Fans/ Layer fan:100%
| PETG |
Extrudate: 230ºC
Bed/ bed: 80ºC
Fans/ Layer fan:70-80%
Travel speed:... 150mm/s
Initial layer speed: 15mm/s
Printing speed/ Printing speed: 30mm/s
Perimeters/Shells: 3
Layer height: 0.16 or 0.2mm (as desired)
Top and bottom layers / Bottom&Top Layers: 3
Infill: 15%.
Supports: Yes
