Another decorative box 3D for print
2474 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
10cm. x 6.75cm. x 9cm. high.
The model in the photos was printed on my Makerbot Replicator+ at the default setting of 10% infi...ll and a layer height of 0.2mm. I used a raft, but no supports are needed when the parts are printed in the same orientation as the STL files shown here.
See more of my designs at https://www.thingiverse.com/Winslow/designs
Designer
Colin Winslow3d model description
Approx. dimensions:10cm. x 6.75cm. x 9cm. high.
The model in the photos was printed on my Makerbot Replicator+ at the default setting of 10% infi...ll and a layer height of 0.2mm. I used a raft, but no supports are needed when the parts are printed in the same orientation as the STL files shown here.
See more of my designs at https://www.thingiverse.com/Winslow/designs
