Because my balcony door has no handle, I designed this one. Without damaging the door with holes, the doorhandle can only be mounted with double-sided... tape. Based on the weather influence, I have printed it with ABS. For a better adhesion on the heated bed and low warping, one of the STL-files has additional supports. The other file is the same one, but without the supports.
3d model print parameters
The doorhandle is printed with the following settings:
- filament of ABS with 3 mm diameter
- nozzle with 0,5 mm diameter
- layer thickness of 0,1 ...mm
- 100 % filling
- some double-faced adhesive tape