Subscribe to pewdiepie - plack 3D for print
667 Views 0 Likes 0 Downloads Download
Please see the announcement Video where I "improve" 5 different 3D-printable designs:
https://youtu.be/en_...qw3RvsaI
You should subscribe to PewDiePie, since you want him to be the most subscribed youtuber rather then the channel who shall not be named.
You might want to dial in some negative Horizontal expansion Compensation on the inserts. I used -0.1mm on this one for a tight fit.
Feel free to leave any questions or comments!
Check out my social media for sneak peaks and memes:
YouTube
Facebook
Instagram
Designer
SUNSHINE3d model description
This is the Subscribe to PewDiePie plack!Please see the announcement Video where I "improve" 5 different 3D-printable designs:
https://youtu.be/en_...qw3RvsaI
You should subscribe to PewDiePie, since you want him to be the most subscribed youtuber rather then the channel who shall not be named.
You might want to dial in some negative Horizontal expansion Compensation on the inserts. I used -0.1mm on this one for a tight fit.
Feel free to leave any questions or comments!
Check out my social media for sneak peaks and memes:
YouTube
