I saw a picture of a chess drinking game on the web (see attached pic) and wanted to make my own.
So I quickly modelled the parts and startet print...ing. Overall there are 32 parts to be printed. I have only printed 20 yet. The others should follow soon.
Into the figurines fits a volume of 20 ml. So they are the standard size of a shot. Queen and King are slightly bigger, so they are biig shots! :)
Feel free to give critique in the comment section below!
Have fun, don't drink too much!! :D
If you enjoy my work, I would appreciate a small bitcoin donation to 1MSachsBbZJjBg83nEsTv95oLuQmnmZnGu.
3d model print parameters
The chess game is scaled so that you can print the Chessboard picture (see the attached pictures) on a DinA4 page in full scale and the figurines fit.... So they all fit in a sqare with the sides 2.5 cm long. I would recommend to use different colors for the different sides! :) Also I found that to make sure it is water tight you should use 3 extra shells on all layer types, and you should slightly increase the infill perimeter overlap (I use 0.3 on my huxley) and slightly decrease the infill width over thickness (I use 1.5 on my huxley). Additionally I would recommend using an overall infill solidity of 0.3 to 0.4 that gave me the best results. Also you should at least use 3 solid layers. I use 4.