baby bull dragon - flexi - print in place 3D for print
3684 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is a Print in Place model
As always very easy to print without support structure, just load the Fil...e and start printing
The joints are strong and sturdy
You can get this Model without Name Tag on my Patreon
So have fun with this models
Happy printing
Don't forget to like & rate ❤️
Please share your make with me
If you are looking for more exclusive designs visit my Cults Page.
This design is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially
If you are interested to use all of my designs commercially (digital files excluted!) or you just want to support me, visit my patreon Patreon
Please note that you only have a commercial license with active patreon subscription
Update 15.12
Added a Version with separate Eyes
A leveled bed is required for a nice result
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
I recommend to act...ivate the Z-jump 0.3-0.5mm for more safety
Designer
EndK73d model description
Here I present you the Baby Bull DragonThis is a Print in Place model
As always very easy to print without support structure, just load the Fil...e and start printing
The joints are strong and sturdy
You can get this Model without Name Tag on my Patreon
So have fun with this models
Happy printing
Don't forget to like & rate ❤️
Please share your make with me
If you are looking for more exclusive designs visit my Cults Page.
This design is under copyright. Which means, upon purchase, you do NOT have the right to sell commercially
If you are interested to use all of my designs commercially (digital files excluted!) or you just want to support me, visit my patreon Patreon
Please note that you only have a commercial license with active patreon subscription
Update 15.12
Added a Version with separate Eyes
3d model print parameters
Notes:A leveled bed is required for a nice result
3 walls
10-25% infill
No supports
Raft or brim if you have adhesion issues
I recommend to act...ivate the Z-jump 0.3-0.5mm for more safety
