Baby dory - pixar finding dory 3D for print
1941 Views 2 Likes 2 Downloads Download the piece here from 3dforprint
It's time for possibly my cutest model yet: Baby Dory. This is Dory's baby form from Pixar's Finding Dory. I created this model in Fus...ion 360 based off of images of Baby Dory I found online. After that I printed it out on my Robo3D R1 printer (settings below). Then my wife primed and painted it using a combination of airbrush and normal brush painting.
This model does need supports to print. There are a few areas that have too great of an overhang. Also the fins are pretty thin so I wouldn't recommend scaling this down at all. Scaling up should work perfectly though.
Print Settings:
Printer: Robo3D R1
Filament: Hatchbox PLA
Layer Height: 0.3mm
Infill: 15%
Supports: Yes
Raft: Yes
Designer
ChaosCoreTech3d model description
She's So Cute!It's time for possibly my cutest model yet: Baby Dory. This is Dory's baby form from Pixar's Finding Dory. I created this model in Fus...ion 360 based off of images of Baby Dory I found online. After that I printed it out on my Robo3D R1 printer (settings below). Then my wife primed and painted it using a combination of airbrush and normal brush painting.
This model does need supports to print. There are a few areas that have too great of an overhang. Also the fins are pretty thin so I wouldn't recommend scaling this down at all. Scaling up should work perfectly though.
Print Settings:
Printer: Robo3D R1
Filament: Hatchbox PLA
Layer Height: 0.3mm
Infill: 15%
Supports: Yes
Raft: Yes
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
