Ballista (crossbow) print in place 3D for print
1945 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
This is my mini Ballista, everything printed in place.
Fires the arrow without problem through the room and fur...ther!
Easiest loading method is with help of the arrow as seen in the video.
Tested with PETG and PLA both with 90% infill and layer height of 0,2mm.
Printtime with this settings is about 2 hours.
Designer
senns3d model description
Ballista (crossbow) printed in placeThis is my mini Ballista, everything printed in place.
Fires the arrow without problem through the room and fur...ther!
Easiest loading method is with help of the arrow as seen in the video.
Tested with PETG and PLA both with 90% infill and layer height of 0,2mm.
Printtime with this settings is about 2 hours.
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
