Base for atsc digital hd tv antenna 3D for print
1725 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Print the supplied STL file (supports 1" PVC post), or edit the included SCAD file to customize the base mount as required.
Print in ABS
0.3mm - 0.4mm layer height (for faster printing)
15% infill
2 shells (minimum)
Drill holes in the base plate and screw to the floor of your attic.
Install the antenna post
You are Done!
Designer
cpayne3d3d model description
This is a simple base to support the 3D printable ATSC Digital HDTV Antenna that I designed. https://www.youmagine.com/designs/single-bay-atsc-digital...-hd-tv-antennaPrint the supplied STL file (supports 1" PVC post), or edit the included SCAD file to customize the base mount as required.
Print in ABS
0.3mm - 0.4mm layer height (for faster printing)
15% infill
2 shells (minimum)
Drill holes in the base plate and screw to the floor of your attic.
Install the antenna post
You are Done!
