Battat take-a-part toy airplane bolt replacement 3D for print
1970 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
I made it a little loose because it should be easily screwed in and removed by a child using the toy power drill that comes with the toy. My print in my pictures came out perfect (worked well without polishing) except for a little black abs plastic impurities that I didn't realize were still in the bowden tube which shows up as black
streaks in the print.
Fully usable. However I may do some further neatening of the design at a later time and update.
Designer
Kayle-Ann Lee Chee3d model description
This is a replacement toy bolt for use in the Battat Take-A-Part Toy (Airplane). My son misplaced one of the bolts used to hold the plane parts togeth...er. I drew and printed a replacement for it as I couldn't find any replacements for just the bolt to buy online.I made it a little loose because it should be easily screwed in and removed by a child using the toy power drill that comes with the toy. My print in my pictures came out perfect (worked well without polishing) except for a little black abs plastic impurities that I didn't realize were still in the bowden tube which shows up as black
streaks in the print.
Fully usable. However I may do some further neatening of the design at a later time and update.
![Front damper bridge [Reely Rhino]](https://www.3dforprint.com/modelos/4107/front-damper-bridge-reely-rhino1_medium.jpg)
