Batterybuddy 3D for print
4943 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
BatteryBuddy
Keep your batteries in one place and stay organized before the lights go out!This drawer or wall mount organizer holds AAA, AA, C, D, 9v batteries. That's a whopping 32 batteries at 40 volts of power! Batteries slide in nicely on an incline and are labeled for easy access. Put one next to a flashlight near garage, basement, home, office, boat, and for a friend. You will wonder how you ever lived with out it.
You will find that it has a sturdy feel and build quality with rounds, chamfers, and smooth parting lines. I have even included labels, and mounting holes.
Specifications
- The size is 5.2" x 6.2" x 1.5" inches. (132mm x 157mm x 38mm)
- Volume 9.7 cubic inches
- Holds 12-AAA, 13-AA, 4-C, 2-D, and 1-9V
How to make one
Print face down using PLA or ABS of your choice and color. I designed this for 3d printing, so there would be no need for support or much infill. I have taken the time to design this so you should not need any sanding or finishing.
If you like this, please encourage me to make more. Send me a note. I hope to improve it with your ideas and feedback. Contact me if you want the logo removed.
Note: Batteries not included, Patent pending
The design uses... no abrupt overhangs, so you really won't need support. Please advise me if you find otherwise and I will tweak the design.
Designer
Michael Bourque3d model description
Keep all your batteries in one place and stay organized before the lights go out. This will keep 32 batteries and 40 volts handy right at your fingert...ips. Read more...BatteryBuddy
Keep your batteries in one place and stay organized before the lights go out!This drawer or wall mount organizer holds AAA, AA, C, D, 9v batteries. That's a whopping 32 batteries at 40 volts of power! Batteries slide in nicely on an incline and are labeled for easy access. Put one next to a flashlight near garage, basement, home, office, boat, and for a friend. You will wonder how you ever lived with out it.
You will find that it has a sturdy feel and build quality with rounds, chamfers, and smooth parting lines. I have even included labels, and mounting holes.
Specifications
- The size is 5.2" x 6.2" x 1.5" inches. (132mm x 157mm x 38mm)
- Volume 9.7 cubic inches
- Holds 12-AAA, 13-AA, 4-C, 2-D, and 1-9V
How to make one
Print face down using PLA or ABS of your choice and color. I designed this for 3d printing, so there would be no need for support or much infill. I have taken the time to design this so you should not need any sanding or finishing.
If you like this, please encourage me to make more. Send me a note. I hope to improve it with your ideas and feedback. Contact me if you want the logo removed.
Note: Batteries not included, Patent pending
3d model print parameters
The size is 5.2"x6.2" inches. Print with PLA or ABS with the flat side down with 5-10% infill, no support, and with a brim or raft.The design uses... no abrupt overhangs, so you really won't need support. Please advise me if you find otherwise and I will tweak the design.
