Bbd bracelet 3D for print
1298 Views 1 Likes 0 Downloads Download
My aim was to design something unique, that gets the attention of the people. I always liked the look of these wide bracelet, so I design...ed this. To make it more unique as a jewelry I painted it matt black, to make it outstanding of the usual shiny jewelleries. I tried to shape it as comfortable as possbile and to have solid grip on the arm without significant strain or strecth.
I uploaded 3 different STL files since my slicer was not making support in a certain section of the model, so I added manually, according the printing type (FDM/SLA). Maybe your slicer will make support every where it is needed, therefore you can find a clean version without manually added supports.
It is originally sized on my wrist(58mm width, 40,5mm height), so probably you need to scale it down a little bit 80-90%. My mannequin has really small wrist but 80% was fitting on her perfectly.
I printed it with an FDM printer, it's really testing your stringing settings and you should also consider some sanding after you have printed the model. In my case a lot sanding, but spending more time working on it, just makng it more special. :) You will definitely get better result with a resin printer, probably you only to remove the support and it's done!
I'm really interested of the result with a resin printer, so if you make one with resin, please don't be shy to share the result with me in the comments! ;)
I also appreciate if you press a like :)
Material: PLA
Temperature: 207 °C
Speed: 60/30 mm/s
Z hop recommended
Wall thickness: 2mm
Infill: 100%
Skin overlap: 30%
L...ayer height: 0,1mm
Printing time: about 8 hours
Designer
BBDesign3d model description
#ANYCUBIC3DMy aim was to design something unique, that gets the attention of the people. I always liked the look of these wide bracelet, so I design...ed this. To make it more unique as a jewelry I painted it matt black, to make it outstanding of the usual shiny jewelleries. I tried to shape it as comfortable as possbile and to have solid grip on the arm without significant strain or strecth.
I uploaded 3 different STL files since my slicer was not making support in a certain section of the model, so I added manually, according the printing type (FDM/SLA). Maybe your slicer will make support every where it is needed, therefore you can find a clean version without manually added supports.
It is originally sized on my wrist(58mm width, 40,5mm height), so probably you need to scale it down a little bit 80-90%. My mannequin has really small wrist but 80% was fitting on her perfectly.
I printed it with an FDM printer, it's really testing your stringing settings and you should also consider some sanding after you have printed the model. In my case a lot sanding, but spending more time working on it, just makng it more special. :) You will definitely get better result with a resin printer, probably you only to remove the support and it's done!
I'm really interested of the result with a resin printer, so if you make one with resin, please don't be shy to share the result with me in the comments! ;)
I also appreciate if you press a like :)
3d model print parameters
Printing type: FDMMaterial: PLA
Temperature: 207 °C
Speed: 60/30 mm/s
Z hop recommended
Wall thickness: 2mm
Infill: 100%
Skin overlap: 30%
L...ayer height: 0,1mm
Printing time: about 8 hours
