Beach formwork 3D for print
2073 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
It is about formwork to make shapes with the sand from the beach.
The idea is to use them as sliding formwork so that they lay flat... on the sand, they are filled until they are flush at the top and then move the formwork (mold) upwards to fill it again, giving rise to an extrusion figure that can be combined with repetitions of the same or another of the 3 figures that have been modeled.
At the moment, 3 figures have been made (triangle, square and circle) but later I plan to add more as I see how well this idea works.
I plan to test them with my granddaughter one of these days.
wall thickness 1 mm.
0% padding without supports...
Designer
Joan Duatis3d model description
Beach formworkIt is about formwork to make shapes with the sand from the beach.
The idea is to use them as sliding formwork so that they lay flat... on the sand, they are filled until they are flush at the top and then move the formwork (mold) upwards to fill it again, giving rise to an extrusion figure that can be combined with repetitions of the same or another of the 3 figures that have been modeled.
At the moment, 3 figures have been made (triangle, square and circle) but later I plan to add more as I see how well this idea works.
I plan to test them with my granddaughter one of these days.
3d model print parameters
PLAwall thickness 1 mm.
0% padding without supports...
