Owlbert palisman staff - the owl house 3D for print
75 Views 0 Likes 0 Downloads Download
The download contains pieces of the mo...del ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time. The Owl staff is hollow and allows printing the eyes separately (I printed the with yellow-seethrough filament). You can add LED lights inside.
Check out the whole Palismen collection: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/the-owl-house-palismen-collection/
The files contain 2 versions of the staff. 70cm and 113cm long and are split among smaller printable parts which can be connected by hexagonal pegs.
SIZE
At 100% scale the Owl’s dimensions are approximately:
Width 124 mm
Length 109 mm
Height 207 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. We create our 3D models on our average-sized body template. Read about the sizing and how to scale the models to fit your body here.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
We use a 10 mm brim for tall parts with a small base for better bed adhesion.
Printing settings will vary greatly depending on your specific printer.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links
Designer
3D-mon3d model description
This is a digital 3D printable model of Eda's Owlbert Palisman Staff from the animated series The Owl House.The download contains pieces of the mo...del ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into smaller pieces (OBJ). All cut parts are placed on the print bed as we would print them to save you time. The Owl staff is hollow and allows printing the eyes separately (I printed the with yellow-seethrough filament). You can add LED lights inside.
Check out the whole Palismen collection: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/the-owl-house-palismen-collection/
The files contain 2 versions of the staff. 70cm and 113cm long and are split among smaller printable parts which can be connected by hexagonal pegs.
SIZE
At 100% scale the Owl’s dimensions are approximately:
Width 124 mm
Length 109 mm
Height 207 mm
You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well. We create our 3D models on our average-sized body template. Read about the sizing and how to scale the models to fit your body here.
3D PRINTING SETTINGS
We use these settings for most of our prints:
Layer height 0.15 mm
Infill 15%
Supports 45°
We use a 10 mm brim for tall parts with a small base for better bed adhesion.
Printing settings will vary greatly depending on your specific printer.
We try to make the models in a way that uses as little support material as possible.
This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc. We use hex-pegs (included in the files) that will help you connect the cut pieces of the model.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links
