Japanese puzzle box 3D for print
867 Views 0 Likes 0 Downloads Download
You may need to sand the edges of the end slides to get a smooth movement, but you need some frictio...n so the parts don't move by themselves
Print one of each file except two for the top, middle, and bottom end covers
The EndSlideWithSlot piece should be installed on the end with the more complicated key map
The EndSlide piece should be installed on the end with the simple key map
Ultimaker
Printer:
Ultimaker 2 Extended
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.4 mm head
Infil...l:
20%
Notes:
.1 mm height
Designer
yomamma73d model description
This is a working Japanese puzzle box. 8 move.You may need to sand the edges of the end slides to get a smooth movement, but you need some frictio...n so the parts don't move by themselves
Print one of each file except two for the top, middle, and bottom end covers
The EndSlideWithSlot piece should be installed on the end with the more complicated key map
The EndSlide piece should be installed on the end with the simple key map
3d model print parameters
Printer brand:Ultimaker
Printer:
Ultimaker 2 Extended
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.4 mm head
Infil...l:
20%
Notes:
.1 mm height
