Brier rose tissue box 3D for print
1662 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Notes:
Print-Ready Files
These are the settings for the included .x3g & .gcode files
...
Right Extruder Temp: 230C
Left Extruder Temp: 0C
Heated Bed Temp: 50C
You need to print both a bottom and top file (unless you only want half of a box)
Bottom file takes 15+ hours and the Top file takes 20+ hours
DUAL
The Dual.zip contains files for a dual extrusion option. Disclaimer - I have not taken the time to determine the best settings for these files or even how well they work - I suspect dual will be EPIC but don't want to spend 30+ hours on each half to find out right now.
Original file
The .SLDPRT are the original Solidworks Files used to create the non-dual .STLs - included for your modifying pleasure.
Designer
WeeksB3d model description
Surround your boring tissue box with brier roses and let it sleep for a hundred years (or just until you sneeze)...3d model print parameters
Rafts:No
Supports:
No
Resolution:
0.1mm
Infill:
100%
Notes:
Print-Ready Files
These are the settings for the included .x3g & .gcode files
...
Right Extruder Temp: 230C
Left Extruder Temp: 0C
Heated Bed Temp: 50C
You need to print both a bottom and top file (unless you only want half of a box)
Bottom file takes 15+ hours and the Top file takes 20+ hours
DUAL
The Dual.zip contains files for a dual extrusion option. Disclaimer - I have not taken the time to determine the best settings for these files or even how well they work - I suspect dual will be EPIC but don't want to spend 30+ hours on each half to find out right now.
Original file
The .SLDPRT are the original Solidworks Files used to create the non-dual .STLs - included for your modifying pleasure.
