Cable holder 3D for print
11520 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Quick to print and easy to use cable holder, to help arrange cables under tables, desks, wall cabinets, behind furniture, etc. Will probably fit 8-10 cables, despite the fairly small size. I'm considering whether to scale it down.
Takes less than 20 minutes to print on my printer, and screws in with a typical wood screw. You'll be done and arranged in 30 minutes! Very easy to mount, with a single screw you just screw it in quickly and turn the cable holder to the angle you want it.
Printed fine without support. I had to push the arms apart a little bit to fit my drill between to screw in the screw, but that was not a problem.
This design was inspired by other designs found online, but they looked too big and massive.
Designer
ketil3d model description
Quick to print and easy to use cable holder, to help arrange cables under tables, desks, wall cabinets, etc. Takes less than 20 minutes to print on my... printer, and screws in with a typical wood screw. You'll be done in 30 minutes!Quick to print and easy to use cable holder, to help arrange cables under tables, desks, wall cabinets, behind furniture, etc. Will probably fit 8-10 cables, despite the fairly small size. I'm considering whether to scale it down.
Takes less than 20 minutes to print on my printer, and screws in with a typical wood screw. You'll be done and arranged in 30 minutes! Very easy to mount, with a single screw you just screw it in quickly and turn the cable holder to the angle you want it.
Printed fine without support. I had to push the arms apart a little bit to fit my drill between to screw in the screw, but that was not a problem.
This design was inspired by other designs found online, but they looked too big and massive.
![RJ45 replacement in two parts [stronger & tighter fit]](https://www.3dforprint.com/modelos/9419/rj-replacement-in-two-parts-stronger-tighter-fit1_medium.webp)
