Cable tie belt tensioner - upgrade!! 3D for print
2696 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Uses 2.5mm cable ties.
I like it because if for any reason the carriage stucks, the cable tie breaks before any other part of... the printer.
My older version, was made to be printed on a very bad printer.
This one works way better.
See all my designs on cults:
https://cults3d.com/en/users/jajaum3d/creations
Leave me a tip:
https://www.paypal.com/donate/?hosted_button_id=93XDLZK2R3CGC
Doesn't Matter
Supports:
No
Resolution:
0.2
Notes:
0.2mm layer height
Use 5 walls to make a solid piece
Print them as in the f...ile
Designer
Henrique Fontana3d model description
Simple belt tensioner.Uses 2.5mm cable ties.
I like it because if for any reason the carriage stucks, the cable tie breaks before any other part of... the printer.
My older version, was made to be printed on a very bad printer.
This one works way better.
See all my designs on cults:
https://cults3d.com/en/users/jajaum3d/creations
Leave me a tip:
https://www.paypal.com/donate/?hosted_button_id=93XDLZK2R3CGC
3d model print parameters
Rafts:Doesn't Matter
Supports:
No
Resolution:
0.2
Notes:
0.2mm layer height
Use 5 walls to make a solid piece
Print them as in the f...ile
![RJ45 replacement in two parts [stronger & tighter fit]](https://www.3dforprint.com/modelos/9419/rj-replacement-in-two-parts-stronger-tighter-fit1_medium.webp)
