Customizable display shelf_no supports needed 3D for print
94 Views 0 Likes 0 Downloads Download
No normal Display Shelf but one that i can personalize in many different ways.
So I started... this projekt and used a plug-in system for this shelf.
Each Plate is 100mm wide and could be pluged-in with another Plate.
There are 3 different Plates with different lenghts and Struktures.
I also made 3 different conectors and 3 different holder.
Just to make this projekt as customizable as possible for you.
Have fun with this print & have a look for my other pieces
I would appreciate it if you leave me a like & post your make :)
Designer
EndK73d model description
I've wanted to create a Display Shelf for my prints.No normal Display Shelf but one that i can personalize in many different ways.
So I started... this projekt and used a plug-in system for this shelf.
Each Plate is 100mm wide and could be pluged-in with another Plate.
There are 3 different Plates with different lenghts and Struktures.
I also made 3 different conectors and 3 different holder.
Just to make this projekt as customizable as possible for you.
Have fun with this print & have a look for my other pieces
I would appreciate it if you leave me a like & post your make :)
