Print this two piece Thing for a wall-mountable coat hanger, perfect for the office.
Printed in PLA, this coat hanger was able to hold a heavy 5 Ib... coat (not pictured) for a full 8 hour day with no noticeable issues. If the tolerances between the pieces is perfect, there is even no need for any adhesives to hold the piece together.
Not included: Mounting screws
Screw holes dimensions:
Larger countersink diameter 8.5 mm
Smaller screw diameter: 6.5 mm
Thing Files:
Part 1 & 2 STL for printing
Original Solidwork Part file for tweaking (I suggest you avoid making too many modifications to the knotwork as it's kind of touchy)
3d model print parameters
Printer brand:
FlashForge
Printer:
Inventor
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.3 mm
Infill:
13%
Filament brand:
doesn't... matter
Filament color:
doesn't matter
Filament material:
PLA
Notes:
I added a touch of Elmer's glue because the tolerances were a bit large for this print and I didn't want the pieces wobbling around. The Elmer's glue was actually unneeded and if anything, didn't actually add any strength.
Note: was printed on FlashForge Creator I which is not an option and Printer Model is required to be selected for some reason.