Charging station 3D for print
2917 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Print this docking station and add the adapter like mentioned. Now you can charge all your devices overni...ght in one place only using one socket.
There is room for 2 x 10mm, 1 x 15mm, 4 x 21mm devices.
I printed it in PLA-HPA with 0,8mm shell, 10pct infill, 50mm/s. Glued to the glassplate.
- 1 The adapter / charger:
http://www.miniinthebox.com/nl/30w-6port-usb-desktop-ac-oplader-adapter-voor-samsung-mobiele-telefoon-iphone...-en-anderen-6a-150cm-eu-stekker_p1914476.html
- 2 And 6 of these cables:
http://www.miniinthebox.com/nl/3-0-usb-male-naar-micro-usb-male-kabel_p602729.html
They also sell other type of cables!! For ipods, curled or other length etc.
Designer
Jeroen van Zijp3d model description
Connect and charge up to 6 devices at once.Print this docking station and add the adapter like mentioned. Now you can charge all your devices overni...ght in one place only using one socket.
There is room for 2 x 10mm, 1 x 15mm, 4 x 21mm devices.
I printed it in PLA-HPA with 0,8mm shell, 10pct infill, 50mm/s. Glued to the glassplate.
3d model print parameters
Buy these:- 1 The adapter / charger:
http://www.miniinthebox.com/nl/30w-6port-usb-desktop-ac-oplader-adapter-voor-samsung-mobiele-telefoon-iphone...-en-anderen-6a-150cm-eu-stekker_p1914476.html
- 2 And 6 of these cables:
http://www.miniinthebox.com/nl/3-0-usb-male-naar-micro-usb-male-kabel_p602729.html
They also sell other type of cables!! For ipods, curled or other length etc.
