Chess board 3D for print
1612 Views 1 Likes 2 Downloads Download
https://www.thingiverse.com/thing:470700
. Each square is 45mm x 45mm. Ass...embly is snap-together, no glue needed, but could (perhaps, should) be used if you're planning on moving this around a lot.
Parts to be printed (quantity needed for each color)
2 CornerChessBoardTile
12 EdgeChessBoardTile
18 CenterChessBoardTile
Locking rings (that hold the tiles together) can be printed in any color, as they don't show, a total of 112 of them are needed.
I've included the OpenScad file if you need to re-scale to match your chess pieces.
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament_brand:
Amazon Premium
...
Filament_color:
Grey / White
Filament_material:
PLA
Notes:
stl files are top-side down to allow printing without supports
Post-Printing
Print a couple of the tiles and a few of the lock rings to test-fit before you print all of them. The size of the ID and OD of the lock ring can be adjusted as needed.
Designer
steve_533d model description
Designed this in OpenScad to go along with BigBadBison's Spiral Chess Sethttps://www.thingiverse.com/thing:470700
. Each square is 45mm x 45mm. Ass...embly is snap-together, no glue needed, but could (perhaps, should) be used if you're planning on moving this around a lot.
Parts to be printed (quantity needed for each color)
2 CornerChessBoardTile
12 EdgeChessBoardTile
18 CenterChessBoardTile
Locking rings (that hold the tiles together) can be printed in any color, as they don't show, a total of 112 of them are needed.
I've included the OpenScad file if you need to re-scale to match your chess pieces.
3d model print parameters
Printer brand:Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament_brand:
Amazon Premium
...
Filament_color:
Grey / White
Filament_material:
PLA
Notes:
stl files are top-side down to allow printing without supports
Post-Printing
Print a couple of the tiles and a few of the lock rings to test-fit before you print all of them. The size of the ID and OD of the lock ring can be adjusted as needed.
