Christmas star puzzle 55mm 3D for print
1438 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
You need 12 spikes for one star:
10x "normal" spike with two pins and three holes
2x "top" spike with five pins
The...re is also the "top spike" with hole to put cotton or wire through.
Number in the name of the file = gap between pins and holes
0050 = 0,050 mm
0075 = 0,075 mm
Sometimes the gap 0,05mm is too tight (depends on material and printer settings) so I made the second version. Or you can change scale of model.
Infill (fill density): 0%
Bottom (and top) solid layers: 0
Perimeters: 2
Vist also big version:
Christmas Star Puzzle 300mm
Designer
atry3d model description
Christmas Star Puzzle 55mmYou need 12 spikes for one star:
10x "normal" spike with two pins and three holes
2x "top" spike with five pins
The...re is also the "top spike" with hole to put cotton or wire through.
Number in the name of the file = gap between pins and holes
0050 = 0,050 mm
0075 = 0,075 mm
Sometimes the gap 0,05mm is too tight (depends on material and printer settings) so I made the second version. Or you can change scale of model.
Infill (fill density): 0%
Bottom (and top) solid layers: 0
Perimeters: 2
Vist also big version:
Christmas Star Puzzle 300mm
