Ultimaker2 template for simplify3d 3D for print
1138 Views 0 Likes 0 Downloads Download
Ultimaker 2 Template for Simplify3D
This is a remix of Mike Bogutsch's (fortwienix) Wanhao Template for S3D,
http://www.thing...iverse.com/thing:2298799
Many thanks for his permission to use his instructions as below.
(The template I have made is for Simplify3D but I have read somewhere that it also works with other slicers.)
At the moment the Template is for the Ultimaker2, UMO and UM3 may follow shortly
Simplify3D template Installation:
Copy the stl file (e.g. UltimakerPrintBed.stl) to the following folder:
C: \ Users \ USERNAME \ AppData \ Local \ Simplify3D \ S3D software
Start Simplify3D and export your FFF profile to the desktop (File-> Export FFF profile)
Open the profile with an editor e.g:Notepad and search for the following entries (about line 145 ish)....
overridePrinterModels>0
printerModelsOverride> .....change the upper value from 0 to 1 and in the second line enter the name of the template. like below
overridePrinterModels>1
printerModelsOverride>TEMPLATE NAME.STL If overridePrinterModels already is set to 1, you do not need to change this.
Save the FFF profile and import it back to Simpify3D
Restart Simplify3D
Tip:
If you think the template is not centered. Import the model to Simplify3D, change the position and Export the model (File->Export Models->Export Binary STL)
SolidWorks CAD software, the original model files were from GitHub.
Thanks to Mike for the original Wanhao templa...te, permission to copy and use his original instructions which are clear and easy to follow, and the idea to add the UM2 one.
This is a 'What Duck" design
Designer
Izzy3d model description
UM template for S3DUltimaker 2 Template for Simplify3D
This is a remix of Mike Bogutsch's (fortwienix) Wanhao Template for S3D,
http://www.thing...iverse.com/thing:2298799
Many thanks for his permission to use his instructions as below.
(The template I have made is for Simplify3D but I have read somewhere that it also works with other slicers.)
At the moment the Template is for the Ultimaker2, UMO and UM3 may follow shortly
Simplify3D template Installation:
Copy the stl file (e.g. UltimakerPrintBed.stl) to the following folder:
C: \ Users \ USERNAME \ AppData \ Local \ Simplify3D \ S3D software
Start Simplify3D and export your FFF profile to the desktop (File-> Export FFF profile)
Open the profile with an editor e.g:Notepad and search for the following entries (about line 145 ish)....
overridePrinterModels>0
printerModelsOverride> .....change the upper value from 0 to 1 and in the second line enter the name of the template. like below
overridePrinterModels>1
printerModelsOverride>TEMPLATE NAME.STL If overridePrinterModels already is set to 1, you do not need to change this.
Save the FFF profile and import it back to Simpify3D
Restart Simplify3D
Tip:
If you think the template is not centered. Import the model to Simplify3D, change the position and Export the model (File->Export Models->Export Binary STL)
3d model print parameters
The STL file was produced using.SolidWorks CAD software, the original model files were from GitHub.
Thanks to Mike for the original Wanhao templa...te, permission to copy and use his original instructions which are clear and easy to follow, and the idea to add the UM2 one.
This is a 'What Duck" design
