Clip tape cutter 3D for print
7141 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Press down on the tape to cut it. It is like cutting paper with a ruler.
The blade is reasona...bly sharp, so please be careful if you have small children.
The edge of the tape remains in a slightly flipped after cutting, making it convenient for continuous cutting.
Can be used for from thin to thick tape rolls.
Models for tape widths of 20mm/25mm/30mm/35mm/40mm/45mm/50mm.
No supports needed.
Blades should be printed without raft. (for sharp edge)
A rubber band is needed for assembly. If you use TPU bands instead, it looks nicer and lasts longer.
Simple clip cutter for masking tape is here: https://www.thingiverse.com/thing:4851045
Designer
katsuhiko kikkawa3d model description
A tape cutter having the following features.Press down on the tape to cut it. It is like cutting paper with a ruler.
The blade is reasona...bly sharp, so please be careful if you have small children.
The edge of the tape remains in a slightly flipped after cutting, making it convenient for continuous cutting.
Can be used for from thin to thick tape rolls.
Models for tape widths of 20mm/25mm/30mm/35mm/40mm/45mm/50mm.
No supports needed.
Blades should be printed without raft. (for sharp edge)
A rubber band is needed for assembly. If you use TPU bands instead, it looks nicer and lasts longer.
Simple clip cutter for masking tape is here: https://www.thingiverse.com/thing:4851045
![[with release hole] Zipper Pull using paperclip](https://www.3dforprint.com/modelos/9420/with-release-hole-zipper-pull-using-paperclip1_medium.webp)
![RJ45 replacement in two parts [stronger & tighter fit]](https://www.3dforprint.com/modelos/9419/rj-replacement-in-two-parts-stronger-tighter-fit1_medium.webp)