Coffee filter caddy 3D for print
1058 Views 0 Likes 0 Downloads Download
Since I buy my filters in bulk, I needed a nice little box to leave some in on ...the kitchen counter.
Printed at 100% infill in PLA. Walls are 1.6mm (as per thk parameter) so infill % doesn't matter much if your wall thickness is at least 0.8mm.
I prefer to print the parts separately since the base does not need any brim, but the lid benefits from a small brim to keep the hinge area from curling up.
Designer
Jeff Hertzberg3d model description
Lidded box for holding paper coffee filters of the "Melitta" variety.Since I buy my filters in bulk, I needed a nice little box to leave some in on ...the kitchen counter.
3d model print parameters
STLs are sized for #4 Melitta filters. You could scale the files for other filter sizes, but for the sake of keeping the hinges round and of a good si...ze it is better to use the SCAD file to create new STL files for the proper size. The design is parameterized and the variables are documented. You will likely want to change the values for wd, dp, ht, and droop.Printed at 100% infill in PLA. Walls are 1.6mm (as per thk parameter) so infill % doesn't matter much if your wall thickness is at least 0.8mm.
I prefer to print the parts separately since the base does not need any brim, but the lid benefits from a small brim to keep the hinge area from curling up.
![DUTCHdesign EGG-CUP [with spoon holder] EASTER EDITION PART IV](https://www.3dforprint.com/modelos/9867/dutchdesign-eggcup-with-spoon-holder-easter-edition-part-iv1_medium.webp)
