Just a printable model of a concealed handle which I saw flashing by on Aliexpress.
I thought it would be fun to print these yourself.
So now yo...u don't have to wait for delivery and you can choose your own colors..
Also added a 2nd plate with sunken holes for Ø4 screws.
See attached drawing for installation dimensions and rectangular hole to be made.
Magnets for locking in place.
I have added a version for use with small magnets to lock the handle in place. When using, you have to apply a little more force to operate the handle, when it is at rest it will remain in place.
3 magnets of Ø2x2mm are required. One in the handle and 2 in the plate.
When the handle is rotated, the magnet moves into the rotated position opposite the other magnet in the plate.
The magnets are placed slightly offset in the plate (-0.5mm) so that the attraction of the magnets pulls the handle against the mechanical blocking.
Mount the magnets with a small amount of glue so that they cannot come loose during use.
During use, the magnets and holes remain completely out of sight because they remain behind the plate.