2020 corner bracket 3D for print
1228 Views 1 Likes 0 Downloads Download
A strong corner piece for building frames out of 2020 Aluminum extrusion. Each of the three pieces join...ed together by the part are contacted by three screws each in a triangular pattern. The part fits into the extrusion's slot for a tight secure fit. The screw holes are for M4 screws with hex socket head caps, there is a 2mm counter sink on each holes. One of the screw holes is for an M6, the hole on the end of the extrusion must be tapped for this.
General Specs:
- Print at 40% for Strength, PLA is fine
- Layer height at 0.2mm for screw hole/countersink accuracy
- M4 Metric Screws with 2mm Countersink
- Channel slots for tight and square fit
- M6 Metric screw for extrusion end tapped hole
- Each Aluminum piece is contacted by three screws in a triangular patter for max rigidity
Designer
robo_kid223d model description
20mm X 20mm Al Extrusion Frame Corner BrackerA strong corner piece for building frames out of 2020 Aluminum extrusion. Each of the three pieces join...ed together by the part are contacted by three screws each in a triangular pattern. The part fits into the extrusion's slot for a tight secure fit. The screw holes are for M4 screws with hex socket head caps, there is a 2mm counter sink on each holes. One of the screw holes is for an M6, the hole on the end of the extrusion must be tapped for this.
General Specs:
- Print at 40% for Strength, PLA is fine
- Layer height at 0.2mm for screw hole/countersink accuracy
- M4 Metric Screws with 2mm Countersink
- Channel slots for tight and square fit
- M6 Metric screw for extrusion end tapped hole
- Each Aluminum piece is contacted by three screws in a triangular patter for max rigidity
