Cringe puzzle 3D for print
1311 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
iframe src="//giphy.com/embed/2JXYiE2ZAGj3G" width="480" height="270" frameborder="0" class="giphy-embed" allowfullscreen="allowfullscreen"
via GIPHY
r4e
Post-Printing
After you print all 8 pieces you'll need to sand them. Get a screwdriver and some 100 grit paper. Wrap the paper around the screwdriver so you can sand the female profile of each piece. Do this until all pieces can easily slide through one another.
Designer
intentional3d3d model description
There is a GIF floating around of a wood puzzle that is extremely dissatisfying. The model assembles and looks like it should make a nice ring however... it will always be slightly askew. Print one out and trigger some emotional responses from those around you.iframe src="//giphy.com/embed/2JXYiE2ZAGj3G" width="480" height="270" frameborder="0" class="giphy-embed" allowfullscreen="allowfullscreen"
via GIPHY
r4e
Post-Printing
After you print all 8 pieces you'll need to sand them. Get a screwdriver and some 100 grit paper. Wrap the paper around the screwdriver so you can sand the female profile of each piece. Do this until all pieces can easily slide through one another.
