Curtain rod holders 3D for print
1199 Views 0 Likes 0 Downloads Download
It probably saved me around 20 euros to mak...e this myself, and it looks nicer for the baby room. It's tidy because normally such as shape would end up being made from several parts.
- Print at least 2 of these, or 3 if you also want to support it in the middle like I did.
- Print the middle ...one with at least 30% infill, because it needs to be strong. The ones on the sides don't need to carry as much weight.
Designer
Erik de Bruijn3d model description
I needed something to support the rod from which my curtains are suspended, so I designed and printed it.It probably saved me around 20 euros to mak...e this myself, and it looks nicer for the baby room. It's tidy because normally such as shape would end up being made from several parts.
3d model print parameters
- Material: Worked fine in white PLA.- Print at least 2 of these, or 3 if you also want to support it in the middle like I did.
- Print the middle ...one with at least 30% infill, because it needs to be strong. The ones on the sides don't need to carry as much weight.
