Cute smiling axolotl statue 3D for print
604 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Now you have the possibility to print a marvelous Axolotl decoration as an glas...ses-, rings- and chainsholder.
I love the other Axolotl models so i decided to create my own one.
It tooks me many tries and lot's of hours to get a good looking and printable result.
But now I'm realy glad to share this one with you and every time I look at this model it fills me with pride.
Have fun with this print.
Please give me a like / rating & share your makes with me :)
If you are interested to use all of my designs for commercial use (digital files excluted!) or you just want to support me, visit my patreon:
https://www.patreon.com/EndK7
Printingsettings:
Make shure you activated supports, they are necessary for this print.
Also i used a brim with 9mm wide.
I printed this ...model with 60mm/s and activated a little retract Z jump 0.5mm to make shure that the printer wouldn't push the model away.
Printed this with mat terracotta PLA Greeetech Filament.
Nozzletemp 190°C
Bedtemp 60°C
Infill 15% with multiple lines (2x)
Designer
EndK73d model description
This is the first, the one and only cute smiling Axolotl Sculpture.Now you have the possibility to print a marvelous Axolotl decoration as an glas...ses-, rings- and chainsholder.
I love the other Axolotl models so i decided to create my own one.
It tooks me many tries and lot's of hours to get a good looking and printable result.
But now I'm realy glad to share this one with you and every time I look at this model it fills me with pride.
Have fun with this print.
Please give me a like / rating & share your makes with me :)
If you are interested to use all of my designs for commercial use (digital files excluted!) or you just want to support me, visit my patreon:
https://www.patreon.com/EndK7
3d model print parameters
Notes:Printingsettings:
Make shure you activated supports, they are necessary for this print.
Also i used a brim with 9mm wide.
I printed this ...model with 60mm/s and activated a little retract Z jump 0.5mm to make shure that the printer wouldn't push the model away.
Printed this with mat terracotta PLA Greeetech Filament.
Nozzletemp 190°C
Bedtemp 60°C
Infill 15% with multiple lines (2x)
