3d printed jet boat v2 3D for print


 3d printed jet boat v2  3d model for 3d printers

 3d printed jet boat v2  3d model for 3d printers
 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers 3d printed jet boat v2  3d model for 3d printers
2976 Views 5 Likes 0 Downloads Download

Designer

Jotham B

3d model description

Version 2 of the 3D printed jetboat project.
Latest version here: http://www.simply3d.co.nz/kwikjet

semi final update:
Version 3 is now out still... untested - there for those who are keen: The only changes are a new hull shape. All version 2 and 3 parts are compatible. I'm working on a new version yet again. Next version will be 600mm long with 35mm pump.
https://www.youmagine.com/designs/version-3-3d-printed-jetsprint-jet-boat
Too fast! I look forward to trying it out on a smooth lake one day.

Forum thread: https://www.rcgroups.com/forums/showthread.php?3061106
Version 1: https://www.youmagine.com/designs/prototype-jetsprint-jet-boat
Version 2: (you are here)
Version 3: https://www.youmagine.com/designs/version-3-3d-printed-jetsprint-jet-boat

Specs:

Impeller: 29mm diameter, 29mm pitch
Exit nozzle diameter: 22mm
Hull length: 460mm
Hull width: ~185mm
9g servo for steering (can use larger servos when adapter plate used)
Weight of printed parts: 550g (PLA), 460g (ABS)

Power system:
As you can see in the video, the power system I used was completely over powered. The boat does appear to handle better when it is lighter and a smaller motor would help reduce the weight. Parts used are as follows:

3674 brushless inrunner motor @1900KV. 61A max. Max power 1800w.
2x 2200mAh batteries, 25C.
120A watercooled ESC

Improvements in this version:

Deeper v - skips over the waves less
30mm longer and 20mm wider
Better sealing lid with only 2 screws for easy/quick opening.

Ideas to improve for the (maybe) next version:

Add printed ducts inside of the hull. Then have it use the venturi effect to suck any water out of the bottom of the boat this way the boat would pump out any water that got in when the pump is running
Thats about it. I'm pretty happy with it as it is. Suggestions for improvements are welcome :-)

UPDATE: I've now added a bash plate to the nozzle. The new file is called "nozzle & bashplate.stl" and can be found in the download.


3d model print parameters

Can be printed in ABS PLA or PETG. ABS is my preference. If you are using PLA try to keep the fan off for the hull parts or else the sharp hull corner...s tend to lift a little.

Use 0.15mm layer height for the impeller. Print with supports enabled. For all other parts I used 0.25mm layer height with a 0.4mm nozzle on my Original Prusa i3 MK2.

The nozzle takes a 3mm inner, 4mmor 5mm outer diameter teflon tube as a bushing for the shaft (check the last two pictures above). I cut 5mm off some spare bowden tube and used this. Teflon is a very durable and low friction material - perfect for use here.

Bill of Materials:
- - Weight of printed parts: 550g (PLA), 460g (ABS) you'll need a bit more than that because of required support material
- M3 misc screws
- 6x self tapping screws 10mm long or so
- 1x 105mm long, 3mm stainless steel rod as driveshaft. To mount the impeller securely I ground a flat on the shaft, sanded the rest of the area that was doing to contact the impeller and super glued it in place.
- 1x 623RS bearing (623ZZ is also fine but rubber seal is of course better when water is involved)
- 1x 750mm of servo pushrod wire (most of it is used as a water intake screen)
- 1x flexible coupler to go from motor to the driveshaft. I used 3 to 5mm universal joint adapter. Most 36mm diameter motors use 5mm shafts. I would recommend a universal joint which can be found for $1-2 on aliexpress. You could print your own universal joint or direct coupler (both are printable and included in files).

Electronics:
- 1x 9g servos

- 1x Motor + ESC
I'll be using this motor: https://hobbyking.com/en_us/turnigy-xk3674-1900kv-brushless-inrunner.html
And this ESC: https://hobbyking.com/en_us/hobbyking-120a-boat-esc-4a-ubec.html

My reference told me to pick a motor/battery combo that delivers up to 20,000 rpm and can handle about ~75A continuous. Refer to: https://www.kehrer-modellbau.de/en/kmb-jet28/jet-drives/kmb-jet28-rev.-3-with-short-steering-nozzle

Included in the files are mounting brackets for 36mm and 28mm diameter inrunner motors as well as a mount for common airplane motors using 19mm hole spacing.

- 2x lipo batteries. You'll want two: one to place in either side of the motor for balance. I will use 2x 2200mAh 3S lipo batteries. I like to use velcro to hold batteries in place. I feel its a bit on the heavy side so lighter batteries wouldn't hurt
- 1x transmitter/receiver set. I will be using my Flysky i6 setup.

If you have any questions, please do ask!


Tags

Jetboat Jet Jetpump Rc Boat Rc boat Pump Jetsprint Jet sprint Toys Toy Game

License

CC Atribution

Related 3d models with tags

3D printed Jetsprint jet boat V1

3D printed Jetsprint jet boat V1

RC Mini Twin Jet Boat - Test Print

RC Mini Twin Jet Boat - Test Print

Fab Lab Tulsa 1 (FLT1)

Fab Lab Tulsa 1 (FLT1)

20mm Tug Propeller

20mm Tug Propeller

Unlimited Hydroplane

Unlimited Hydroplane

RC Mini Jet Boat - Servor Arm Horn

RC Mini Jet Boat - Servor Arm Horn

WiFi Paddle Boat

WiFi Paddle Boat

WiFi Propeller Boat

WiFi Propeller Boat

Microspringer RC Tug boat

Microspringer RC Tug boat

Horse In A Boat

Horse In A Boat

Fab Lab Tulsa Paddle Boat

Fab Lab Tulsa Paddle Boat

Canoe Design

Canoe Design

Wally Power Boat

Wally Power Boat

Paper Boat

Paper Boat

Printed Boat 6

Printed Boat 6

Pirate ship boat cnc art frame router

Pirate ship boat cnc art frame router

Q Boat gunboat

Q Boat gunboat

boat in kit - Bateau en Kit

boat in kit - Bateau en Kit

naked woman in front of a ship boat cnc art frame

naked woman in front of a ship boat cnc art frame

Columbus caravel Nina (1492)

Columbus caravel Nina (1492)