Dark mask - jointed 3D for print
3469 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
More info: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/
Author: http://www.thingiverse.com/Shira/about
Layer height(mm): 0.2
Infill:
10%
Notes:
Printed pla 210º (c)
No need to add supports. Only the top of the mask advise add ...to improve adherence: Brim or raft.
The lower piece of the mask has a small support that you must remove before join the two parts
Designer
BQ Educacion3d model description
Create your own articulated frightening mask. You just have to print two parts and fit the axis of the jaw. Then, add a thin elastic cord to open and ...close the jaw.More info: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/
Author: http://www.thingiverse.com/Shira/about
3d model print parameters
Resolution:Layer height(mm): 0.2
Infill:
10%
Notes:
Printed pla 210º (c)
No need to add supports. Only the top of the mask advise add ...to improve adherence: Brim or raft.
The lower piece of the mask has a small support that you must remove before join the two parts
