Dark mask - jointed 3D for print
1034 Views 0 Likes 0 Downloads Download
More info: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/
Author: https://cults3d.com/en/users/Shira
Rafts: no
Supports: no
Resolution: Layer height(mm): 0.2
Infill: 10%.
Notes:
Printed PLA 210º C. No need to add suppo...rts. Only the top of the mask advise add to improve adherence: Brim or raft. The lower piece of the mask has a small support that you must remove before joining the two parts
3D file format: STL
Last update: 2018/11/20 at 13:40
Publication date: 2016/02/03 at 10:30
Designer
The 3D models of BQ_3D3d model description
Create your own articulated frightening mask. You just have to print two parts and fit the axis of the jaw. Then, add a thin elastic cord to open and ...close the jaw.More info: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/
Author: https://cults3d.com/en/users/Shira
3d model print parameters
3D printing settingsRafts: no
Supports: no
Resolution: Layer height(mm): 0.2
Infill: 10%.
Notes:
Printed PLA 210º C. No need to add suppo...rts. Only the top of the mask advise add to improve adherence: Brim or raft. The lower piece of the mask has a small support that you must remove before joining the two parts
3D file format: STL
Last update: 2018/11/20 at 13:40
Publication date: 2016/02/03 at 10:30
