Turtle 3D for print
935 Views 0 Likes 0 Downloads Download
I like it a lot to creating something movable that you can print pre-assembled, here is Turtle. It's a easy print... and doesn't need support!
There is a small pillar under the neck that you have to break or cut off after printing, this might be a bit tricky, let me know please.
I would also advise to use a brim to keep the different parts better in place while printing.
I just printed one in 90 minutes with these settings:
Print speed 50mm/s
Bottom, outer wall and top 0.5mm
Layer height 0.15mm
Infill 25% with a speed of 75 mm/s
If you want a really nice print, just lower the layer height.
Designer
Egon van Engelen3d model description
Pre-assembled printable toy, TurtleI like it a lot to creating something movable that you can print pre-assembled, here is Turtle. It's a easy print... and doesn't need support!
There is a small pillar under the neck that you have to break or cut off after printing, this might be a bit tricky, let me know please.
I would also advise to use a brim to keep the different parts better in place while printing.
I just printed one in 90 minutes with these settings:
Print speed 50mm/s
Bottom, outer wall and top 0.5mm
Layer height 0.15mm
Infill 25% with a speed of 75 mm/s
If you want a really nice print, just lower the layer height.
