Dead chess v2 3D for print
2071 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Yes
Resolution:
0.2mm
Infill:
25%
Notes:
I recommend 3 to 4 passes (1.2-1.6mm) for the perimeter on the base and risers...
Designer
imchris3d model description
My second chess set. Supports are needed for the Knights only, the rest print just fine without. This is about a 35 hour print and will take about 1/2... kg of plastic . There is some work to do afterwards putting it all together. I found that some of the parts needed a bit of filing in order to fit, try not to force anything. Especially with the pawns, they can be delicate .3d model print parameters
Supports:Yes
Resolution:
0.2mm
Infill:
25%
Notes:
I recommend 3 to 4 passes (1.2-1.6mm) for the perimeter on the base and risers...
