Death trooper (awt trooper) full scale helmet (rogue one) 3D for print
5241 Views 2 Likes 6 Downloads Download the piece here from 3dforprint
Full costume coming, just taking time. Alot of parts.
WH...EN THE MOVIE COMES OUT AND WE HAVE MORE ACCURATE PROFILE SHOTS I WILL UPDATE THE MODEL.
If you like this helmet and want more, please support my Patreon page:
=====> https://www.patreon.com/Geoffro
(This will also give you access to the full suit very soon)
Rogue One - Death Trooper Full Scale Helmet.
This helmet is not for sale or profit.
Assembly instructions are in the image provided and the Dimensions.
14 Parts in Total, cut for a 22x14x15 build plate, full helmet is included its just taking a while to upload. Hopefully out in time for people to get theirs done before the new movie!
Supports Required on Parts
5,6,7,8,13,14
I figured this time I will be more liberal with supports (on the inside of parts..) and make less pieces to print. The thickness was increased on the bases to give them more stick so really no rafts should be needed if you are printing in PLA.
Seams are in easy to sand areas, either a large round area or flat. As usual I split the dome into 4 pieces as it seems to just work well that way.
Thanks to Impaczus for a very early on low poly model (shown in pics along side the his res conversion) It saved a heap of time in getting a base mesh right.
Designer
GEOFFRO3d model description
401's This may not be accurate enough for you, please look away in case you are offended :)Full costume coming, just taking time. Alot of parts.
WH...EN THE MOVIE COMES OUT AND WE HAVE MORE ACCURATE PROFILE SHOTS I WILL UPDATE THE MODEL.
If you like this helmet and want more, please support my Patreon page:
=====> https://www.patreon.com/Geoffro
(This will also give you access to the full suit very soon)
Rogue One - Death Trooper Full Scale Helmet.
This helmet is not for sale or profit.
Assembly instructions are in the image provided and the Dimensions.
14 Parts in Total, cut for a 22x14x15 build plate, full helmet is included its just taking a while to upload. Hopefully out in time for people to get theirs done before the new movie!
Supports Required on Parts
5,6,7,8,13,14
I figured this time I will be more liberal with supports (on the inside of parts..) and make less pieces to print. The thickness was increased on the bases to give them more stick so really no rafts should be needed if you are printing in PLA.
Seams are in easy to sand areas, either a large round area or flat. As usual I split the dome into 4 pieces as it seems to just work well that way.
Thanks to Impaczus for a very early on low poly model (shown in pics along side the his res conversion) It saved a heap of time in getting a base mesh right.
