Desert's kiss - diorama dice tower 3D for print
1158 Views 1 Likes 0 Downloads Download
If you're interested in selling this design, please a...cquire a commercial license by becoming a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/
The Desert's Kiss now exists as a version with LEDs thanks to Tim Powell (MrTEAP on Reddit and Thingiverse). You can find it below along with a very thorough blogpost. A big thank you for all of your effort put into this!
https://www.thingiverse.com/thing:5162922
https://mrteap.medium.com/skull-dice-tower-with-embedded-leds-cdc01fd8bf60
If you liked the print and want to share it, feel free to share it on our Facebook Community:
https://www.facebook.com/groups/arsmoriendi3dcommunity/
Or Subreddit: https://www.reddit.com/r/ArsMoriendi3D/
Happy printing! :)
Visit our shop at https://arsmoriendi3d.com/
Or follow us on https://www.facebook.com/ArsMoriendi3D/
Change log:
Added the spider separately in two different versions. These do require supports, if you decide to print them:
Spider_Separate has an indent and will fit on top of the skull.
Spider_Separate_Full is the full version of the spider (for decoration or as a mini)
Version 1.2.5: Minor update. Strengthened the two lower front teeth a little and increased the area of the front left spider leg just a little to give it some more strength.
Version 1.2: Added teeth to the lower jaw due to popular demand! Both for aesthetics and to help catching dice coming out. Adjusted the inside slope a little more to try and slow down the dice. The spider's front left leg has been more firmly secured to the skull to prevent it from breaking.
Version 1.1: Adjusted the slope inside the skull to make it less steep, as dice sometimes would come out too fast. This change should help but needs to be tested!
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament brand:
Devil D...esign
Filament color:
Beige
Filament material:
PLA
Designer
Ars Moriendi 3D3d model description
The Desert's Kiss is a detailed dice tower that can serve as a decorative diorama on its own.If you're interested in selling this design, please a...cquire a commercial license by becoming a Mythic Merchant: https://arsmoriendi3d.com/mythic-merchant/
The Desert's Kiss now exists as a version with LEDs thanks to Tim Powell (MrTEAP on Reddit and Thingiverse). You can find it below along with a very thorough blogpost. A big thank you for all of your effort put into this!
https://www.thingiverse.com/thing:5162922
https://mrteap.medium.com/skull-dice-tower-with-embedded-leds-cdc01fd8bf60
If you liked the print and want to share it, feel free to share it on our Facebook Community:
https://www.facebook.com/groups/arsmoriendi3dcommunity/
Or Subreddit: https://www.reddit.com/r/ArsMoriendi3D/
Happy printing! :)
Visit our shop at https://arsmoriendi3d.com/
Or follow us on https://www.facebook.com/ArsMoriendi3D/
Change log:
Added the spider separately in two different versions. These do require supports, if you decide to print them:
Spider_Separate has an indent and will fit on top of the skull.
Spider_Separate_Full is the full version of the spider (for decoration or as a mini)
Version 1.2.5: Minor update. Strengthened the two lower front teeth a little and increased the area of the front left spider leg just a little to give it some more strength.
Version 1.2: Added teeth to the lower jaw due to popular demand! Both for aesthetics and to help catching dice coming out. Adjusted the inside slope a little more to try and slow down the dice. The spider's front left leg has been more firmly secured to the skull to prevent it from breaking.
Version 1.1: Adjusted the slope inside the skull to make it less steep, as dice sometimes would come out too fast. This change should help but needs to be tested!
3d model print parameters
Printer brand:Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament brand:
Devil D...esign
Filament color:
Beige
Filament material:
PLA
