Diamond tree 3D for print
1142 Views 0 Likes 0 Downloads Download
A super easy and fast tree to print if you just use these settings
Single wall print
Thickness: 0.8mm
Nozzle: 0.4mm
Fill: 0%
Temperature: 220
Speed: 30mm/s
Bottom/Top Thickness: 0mm
Use Spiral function if available
Here is the trick to get a nice clean top of the tree.
Tweak settings for the last 10mm of your print by using the tweak at z pugin in CURA (oh how I love CURA!!)
Speed 50% of original speed (15mm/s)
Lower the temp with 10 degrees to 210
decrease the flow by 10% to 90% of original flow
If you don't alter these settings, most of the time the top of the tree will droop down/inside.
Enjoy your print and merry Christmas!!
PLA/ABS
Corny Christmas music in the background...
Designer
Elwin3d model description
Cute little Christmas Tree made out of 3 stacked diamonds. Scale to any size in your slicer and follow the instructions to print it to perfection. Bas...ed on the graphic design of our own design Christmas cards for this year. For sale at http://www.en-designshop.com/products/diamond-tree-cardsA super easy and fast tree to print if you just use these settings
Single wall print
Thickness: 0.8mm
Nozzle: 0.4mm
Fill: 0%
Temperature: 220
Speed: 30mm/s
Bottom/Top Thickness: 0mm
Use Spiral function if available
Here is the trick to get a nice clean top of the tree.
Tweak settings for the last 10mm of your print by using the tweak at z pugin in CURA (oh how I love CURA!!)
Speed 50% of original speed (15mm/s)
Lower the temp with 10 degrees to 210
decrease the flow by 10% to 90% of original flow
If you don't alter these settings, most of the time the top of the tree will droop down/inside.
Enjoy your print and merry Christmas!!
3d model print parameters
Ultimaker 1 OriginalPLA/ABS
Corny Christmas music in the background...
