Dice tower with fold-up trays 3D for print

Designer

3dcentralva

3d model description

Do you like rolling dice but hate trying to find them when they roll under your table? Here's a solution!

This dice tower will accommodate most sta...ndard dice sizes, but can be scaled up or down accordingly depending on your preference!

Remixed from garyacrowellsr's
'Remixed Angular Dice Tower, with trays'

Available for purchase from our Etsy!:
http://etsy.me/1Zu1VJZ
Read more

3d model print parameters

Print the following pieces. You will want to print at fairly high resolution (at least .2mm) because of the steep angle, otherwise it could be droopy.... 1x tower.stl 2x tray.stl 4x pin.stl Snap the pins into the holes on the tray, facing inwards, and then snap the tray to the tower. Repeat on the opposite side, and you're ready to play! EDIT: It looks like some people are having trouble with the pins. I print the pins in ABS and they work well, but it's quite possible the pins don't print well in PLA. Read more

Tags

D20 Dice Dice towe Rdndg Aming Tabletop

License

CC Atribution