Dino flintstone 3D for print
2293 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
Dino is my second model from the cartoon series, see Fred as well (Thingiverse model 136...1894)
Dino was modeled in Blender, sliced using Simplify3D and printed in ABS on a FlashForge Creator X. I also used a GeckoTek plate to ensure perfect adhesion of the parts to the bed.
If you have the proper filament colors, no painting is required.
The model is 24cm tall.
Enjoy, and I hope you have a "Yaba Daba Do" time printing this!
FlashForge Creator X
Rafts:
Yes
Supports:
Yes
Resolution:
.2mm
Infill:
10%
Notes:
Only a few pieces require some very minor su...pports and a raft. The majority of pieces do not require either. Refer to the notes below for details.
I print all my models using 2 shells.
Designer
Steve Solomon3d model description
The Flintstones are one of my favorite childhood cartoons.Dino is my second model from the cartoon series, see Fred as well (Thingiverse model 136...1894)
Dino was modeled in Blender, sliced using Simplify3D and printed in ABS on a FlashForge Creator X. I also used a GeckoTek plate to ensure perfect adhesion of the parts to the bed.
If you have the proper filament colors, no painting is required.
The model is 24cm tall.
Enjoy, and I hope you have a "Yaba Daba Do" time printing this!
3d model print parameters
Printer:FlashForge Creator X
Rafts:
Yes
Supports:
Yes
Resolution:
.2mm
Infill:
10%
Notes:
Only a few pieces require some very minor su...pports and a raft. The majority of pieces do not require either. Refer to the notes below for details.
I print all my models using 2 shells.
