Diy 3d printer pandora dxs - 3d design 3D for print

Designer

Zalophus Dokdo

3d model description

DIY 3D Printer PANDORA DXs - 3D Design
DIY 3D Printer - PANDORA DXs (Design eXtreme single)
Technical Specifications



Printing

Technology: ...FFF(Fused Filament Fabrication) / H-Bot(CoreXY)

Build Volume: 223 (W) x 225 (D) x 165 (H) mm, Heatbed, Auto Bed Leveling

Layer Resolution: 50-200 microns

Filament: ABS or PLA, Nyron, HIPS, PVA... 1.75 mm diameter

Nozzle Diameter: 0.4 mm (0.2mm, 0.3mm, 0.8mm)

Print File Type: .Gcode, .STL

Layer Resolutions:

Fast: 200 micron (0.2 mm)

Normal: 100 micron (0.1 mm)

hHigh: 0.06 micron (0.06 mm)

Ultra High: 0,04 micron (0.04 mm)



Size and Weight



Product Dimensions: 426 (W) x 433 (D) x 500 (H) mm
Product Weight: 11 kg



Software



Software Bundle: Cura, Slic3r, KISSlicer / Octoprint, Printrun, Repetier-Host, MatterControl

Supported File Types: .STL, .OBJ, .AMF, .Gcode

Operating Systems: All (Web-based): Windows, Mac OS, Linux



Firmware



Arduino: Modified Marlin v1.0.0

Raspberry Pi: Rasbian, Octoprint, SSH, Samba, VNC, WiringPi



Hardware



Base Plate: Profile DRF 2020, Acrylic

Step Motor: NEMA 17 - Phase: 4, Step Angle: 1.8 Deg/Step, Holding Torque: 2.6Kg.cm

X/Y/Z/E - 4EA

Cartesian (xyz): X/Y Head: LM Guide, Z Bed: 10mm Linear Shaft and 8D Screw Rod



Electrical



Control Board: Arduino Mega 2560

Control Shield: Ramps 1.4 Board

Display Board: Reprap Discount Smart Controller LCD 2004
Raspberry Pi: Raspberry Pi B

Camera: Raspberry Camera

Power Requirements: AC 100 - 240 V, 1.4 Amps, 50-60 Hz, 220 W

Connectivity: USB, SD Card, Wi-Fi (Web-based)

Temperature:

Nozzle temperature: 170 - 270

Heated bed temperature: 50 - 100

Operational temperature: 10 - 40

Storage temperature: 0 - 32



Thanks for watching!........Coming soon!........Updating......

Zalophus's DesignHouse: http://zalophus.tistory.com and https://zddh.blogspot.com Read more

Tags

Diy 3d Design Printer Octoprint Pla Abs Corexy Ramps Acrylic Autobedleveling

License

CC Atribution