3d-printable lampshade for standard light fixture 3D for print
5169 Views 2 Likes 0 Downloads Download the piece here from 3dforprint
The model was made in Cinema 4D using the cogwheel tool for the shade fitti...ng and a cylinder primitive deformed with the taper tool. The surface features were made using the MoExtrude function under the MoGraph menu.
Solid: To print this, please slice the model with no top or bottom layers and if possible use the va...se mode in your 3D printing software. If you choose to print in standard mode (no-vase-mode) you can define the thickness of the shade by adjusting the perimeter shell count.
Thin-walled: This version can be used in most slicers. The thin membrane (0.5 mm) will only make room for one perimeter. By http://Creative-Tools.com
Designer
CreativeTools3d model description
A simple lampshade that fits on standard light fixtures with 30 mm washerThe model was made in Cinema 4D using the cogwheel tool for the shade fitti...ng and a cylinder primitive deformed with the taper tool. The surface features were made using the MoExtrude function under the MoGraph menu.
3d model print parameters
The lampshade is provided in two versions.Solid: To print this, please slice the model with no top or bottom layers and if possible use the va...se mode in your 3D printing software. If you choose to print in standard mode (no-vase-mode) you can define the thickness of the shade by adjusting the perimeter shell count.
Thin-walled: This version can be used in most slicers. The thin membrane (0.5 mm) will only make room for one perimeter. By http://Creative-Tools.com
