Simple Ultimaker 2 Door For Holding The Temperature Stable Inside
You need a discription for a door??? Go and play with the kids... ;)
Simple Ulti...maker 2 Door For Holding The Temperature Stable Inside.
Look in YOUMAGINE for Hinge by Tin Lynx, it´s my favourite hinge because it´s easy to print! By the way great job Tin!
First you have to assemble the hinges to the 3mm plexi-glass plate. Of course you have to drill into you Ultimaker2 frame but it's worth it ;)
Drill a 10mm hole for the Knob into the plexi-glass but not to far away from the housing frame (~18mm).
Cut a M5 thread into the knob for M5 x 20mm screw.
By turning the Knob after you have closed the door there is no possibility for air to either get in or out because it´s jammed to the housing.
3d model print parameters
All you need is
- 1x ) plate of plexi-glass for the door
- 1x ) M5 drill for the thread inside the Turn Key
- 1x ) M5 x 20mm screw for the turn k...ey
- 2x ) hinge with screws of your choice (i like the Hinge by Tin Lynx here in youmagine)