Walking challenge trophies 3D for print
56 Views 0 Likes 0 Downloads Download
We made these trophies as awards for completing a walking challenge where the aim was to walk the most in a month.
Th...ey are all made to hold miniature Johnnie Walker Bottles (0,05l) as a special reward.
The first prize is the one that has the most footprints on the base. If you are going to award just the first 3 I would suggest you print the 1st 3rd and 5th prize (adding 4 footprints for each level)
SIZE
At 100% scale, the models are 64 mm tall.
3D PRINTING SETTINGS
This model prints without supports.
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
15
Filament brand:
Fillamentum
Filament ma...terial:
PLA
Designer
3D-mon3d model description
Walking Challenge TrophiesWe made these trophies as awards for completing a walking challenge where the aim was to walk the most in a month.
Th...ey are all made to hold miniature Johnnie Walker Bottles (0,05l) as a special reward.
The first prize is the one that has the most footprints on the base. If you are going to award just the first 3 I would suggest you print the 1st 3rd and 5th prize (adding 4 footprints for each level)
SIZE
At 100% scale, the models are 64 mm tall.
3D PRINTING SETTINGS
This model prints without supports.
We use these settings for most of our prints:
Layer height 0.2 mm
Infill 15%
Printing settings will vary greatly depending on your specific printer.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com
3d model print parameters
Printer brand:Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0,2 mm
Infill:
15
Filament brand:
Fillamentum
Filament ma...terial:
PLA
